SWING MOTOR Figure 20-90-3 Removal And Installation Remove the right side cover. (See RIGHT SIDE COVER on Page 40-160-1.) Tilt the cab. (See Tilting The Cab on Page 10-160-2.) Figure 20-90-1 1 1 1 2 P-38627 Remove the 2 bolts (Item 1) [Figure 20-90-3] and washers from the side of the center panel. Remove the panel (Item 2) [Figure 20-90-3] . P-38628 IMPORTANT Figure 20-90-2 When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.
1 I-2003-0888 Figure 20-90-4 1 P-38629 1 1 Remove the 2 bolts (Item 1) [Figure 20-90-1] and [Figure 20-90-2] and washers from the top of the center panel. 2 P-38641 Mark and remove the 3 tee fittings (Item 1) [Figure 20- 90-4] . Mark and remove the hose (Item 2) [Figure 20-90-4] . 442 Excavator 20-90-1 Service Manual