SWING MOTOR (CONT’D) Figure 20-90-7 Removal And Installation (Cont’d) Figure 20-90-5 2 1 1 2 1 1 P-38644 1 1 Remove the 4mount bolts (Item 1) [Figure 20-90-7] . P-38642 Installation: Tighten the bolts to 53 ft.-lb. (72 N•m) torque. Mark and remove the 4 bolts (Item 1). Remove the split flange hoses (Item 2) [Figure 20-90-5] . Remove the motor. Figure 20-90-6 Figure 20-90-8 1 1 P-38643 P-38645 Remove the O-ring (Item 1) [Figure 20-90-8] from the swing motor drive carrier. Remove the tee fitting (Item 1) [Figure 20-90-6] . 442 Excavator 20-90-2 Service Manual