SWING MOTOR DRIVE CARRIER Figure 20-91-3 Removal And Installation Drain the hydraulic reservoir. (See Replacing The Hydraulic Oil on Page 10-100-2.) Remove swing motor. (See Removal And Installation on Page 20-90-1) Figure 20-91-1 1 1 P-38649 1 Install lifting brackets (Item 1) [Figure 20-91-3] and a chain hoist on the carrier. Figure 20-91-4 1 P-38646 Remove the 3 hoses (Item 1) [Figure 20-91-1] . 1 1 Figure 20-91-2 1 P-38647 Remove the 12 bolts (Item 1) [Figure 20-91-4] . 1 Installation: Tighten the bolts to 144 ft.-lb. (195 N•m) torque. P-38648 Remove the hose clamps (Item 1) [Figure 20-91-2] to reposition the hoses. 442 Excavator 20-91-1 Service Manual