SWING MOTOR DRIVE CARRIER (CONT’D) Figure 20-91-87 Assembly (Cont’d) Figure 20-91-85 1 1 P-40041 Lay the snap ring (Item 1) [Figure 20-91-87] in the brake housing. P-40039 Install the internal and external brake discs (Item 1) [Figure 20-91-85] . Figure 20-91-88 Figure 20-91-86 1 1 P-40040 Install the plunger disc (Item 1) [Figure 20-91-86] . P-40042 Using a 2.0 inch ID x 2.25 inch OD x 2.750 inch long (50.8 mm ID x 57.2 mm OD x 69.9 mm long) steel tubing (Item 1) [Figure 20-91-88] Press down on the plunger disc to compress the brake discs and belleville spring. NOTE: The top external brake disc does not fully engage the brake carrier splines when first installed.
Use care when compressing the discs to not damage the top disc. 442 Excavator 20-91-24 Service Manual