Bobcat Company 442 — Handle Removal And Installation

LEFT CONTROL LEVER (JOYSTICK) (CONT’D) Figure 20-111-5 Handle Removal And Installation Figure 20-111-3 1 1 1 1 P-35939 1 Disconnect the wire harness (Item 1) [Figure 20-111-5] . P-35919 Figure 20-111-6 Remove the 4 screws (Item 1) [Figure 20-111-3] . Raise the console. Figure 20-111-4 2 1 1 P-35940 1 Mark the wires to the connector body (Item 1) [Figure 20-111-6] . P-35920 Use a small flat blade screwdriver to depress the wire terminal tabs, and remove the individual wires from the connector body. Remove the 3 screws (Item 1) [Figure 20-111-4] . Remove the lower console cover (Item 2) [Figure 20- 111-4] . Installation:

Use a small flat blade screwdriver to rebend the wire terminal tabs on each wire before installing the individual wires in the connector body. 442 Excavator 20-111-2 Service Manual