LEFT CONTROL LEVER (JOYSTICK) (CONT’D) Removal And Installation Handle Removal And Installation (Cont’d) Lower the console. Lower the console. Figure 20-111-9 Figure 20-111-7 1 1 1 1 1 1 2 P-35919 1 P-35942 Remove the 4 screws (Item 1) [Figure 20-111-9] . Pull up on the joystick boot and loosen the 4 mount bolts (Item 1) [Figure 20-111-7] . Raise the console. Remove the grommet and wire harness (Item 2) [Figure 20-111-7] from the joystick body. Figure 20-111-10 2 Pull up on the joystick boot. Figure 20-111-8 1 2 1 1 P-35920 Remove the 3 screws (Item 1) [Figure 20-111-10] . P-35943 Remove the lower console cover (Item 2) [Figure 20- 111-10] . Loosen the nut (Item 1) [Figure 20-111-8] .
Remove the handle (Item 2) [Figure 20-111-8] . 442 Excavator 20-111-3 Service Manual