Bobcat Company 442 — Disassembly And Assembly

AUXILIARY HYDRAULIC FLOW CONTROL VALVE (S/ N 522311001 & ABOVE) (CONT’D) Figure 20-170-9 Disassembly And Assembly (Cont’d) 1 Figure 20-170-7 1 1 P-36251 NOTE: Do not remove the 3 fittings (Item 1) [Figure 20- 170-9]. The fittings are welded to the valve block. Removing the fittings will damage the block and fittings. P-36249 Remove the O-ring (Item 1) [Figure 20-170-7] from the adjustor. Installation: Clean all components with solvent and dry with compressed air. Figure 20-170-8 Inspect all parts and replace any that are damaged. Use new O-rings and back-up rings. Apply clean hydraulic oil to the O-rings and back-up rings during assembly.

1 P-36250 Remove the seal (Item 1) [Figure 20-170-8] from the spool. 442 Excavator 20-170-4 Service Manual