Bobcat Company 442 — Removal And Installation

AUXILIARY HYDRAULIC FLOW CONTROL/ HYDRAULIC BREAKER APPLICATION VALVE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) Figure 20-171-2 Removal And Installation Tilt the cab. (See Tilting The Cab on Page 10-160-2.) 1 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. P-58074 I-2003-0888 Compress the wire retainer (Item 1) [Figure 20-171-2] to remove the wire harness connector from the solenoid. Figure 20-171-1 Figure 20-171-3 1 1 2 1 1 1 P-58073 P-58076 Mark and remove the hoses (Item 1) [Figure 20-171-1] .

Remove the bolts (Item 1) and washers. Remove the valve (Item 2) [Figure 20-171-3] . 442 Excavator 20-171-1 Service Manual