BLADE VALVE (CONT’D) Figure 20-180-6 Disassembly And Assembly Figure 20-180-4 2 1 2 1 1 P-36267 Installation: Install the roll pin (Item 1) through the tab (Item 2) [Figure 20-180-6] on the top of the block. P-36253 Remove the 2 bolts (Item 1) from the plate (Item 2) [Figure 20-180-4] . Remove the plate. Figure 20-180-7 Figure 20-180-5 2 1 1 P-36256 2 Remove the pin (Item 1) and block (Item 2) [Figure 20- 180-7] . P-36255 Remove the roll pin (Item 1) through the hole (Item 2) [Figure 20-180-5] in the bottom plate. 442 Excavator 20-180-3 Service Manual