BLADE VALVE (CONT’D) Figure 20-180-10 Disassembly And Assembly (Cont’d) Figure 20-180-8 1 1 3 2 P-36259 1 Remove the plunger assemblies (Item 1) [Figure 20-180- 10] . P-36257 Remove the 4 outside bolts (Item 1) and center bolt (Item 2) [Figure 20-180-8] . Figure 20-180-11 NOTE: Use care when removing the bolts. The plunger assemblies (Item 3) [Figure 20-180-8] are spring loaded. 1 Installation: Install the center bolt (Item 2) [Figure 20- 180-8] first to retain the plunger assemblies in proper alignment. Figure 20-180-9 2 P-36260 2 Remove the push rod (Item 1) [Figure 20-180-11] from the plunger body. 1 P-36258 Remove the plate (Item 1) [Figure 20-180-9] . Installation:
Use care not to dislodge the plunger assemblies (Item 2) [Figure 20-180-9] until the plate (Item 1) [Figure 20-180-9] is secured by the center bolt (Item 2) [Figure 20-180-8] . 442 Excavator 20-180-4 Service Manual