BLADE VALVE (CONT’D) Figure 20-180-18 Disassembly And Assembly (Cont’d) Figure 20-180-16 1 5 4 3 2 1 P-36115 Remove the O-ring (Item 1) [Figure 20-180-18] from the plugs. P-36231 Remove the retainer (Item 1), piston (Item 2), spring (Item 3), and shims (Item 4) from the spool (Item 5) [Figure 20-180-16] . Figure 20-180-19 Figure 20-180-17 1 1 1 P-36266 NOTE: Do not remove the 4 fittings (Item 1) [Figure 20-180-19] The fittings are welded to the valve block. Removing the fittings will damage the block and fittings. P-36265 Remove the 2 plugs (Item 1) [Figure 20-180-17] . Installation: Clean all components with solvent and dry with compressed air.
Inspect all parts and replace any that are damaged. Use new O-rings and back-up rings. Apply clean hydraulic oil to the O-rings and back-up rings during assembly. 442 Excavator 20-180-6 Service Manual