BLADE FLOAT VALVE Figure 20-181-3 Removal And Installation Open the rear cover. Figure 20-181-1 1 2 1 P-33389 Remove the tee (Item 1) [Figure 20-181-3] . Remove the hose (Item 2) [Figure 20-181-3] . P-33387 Figure 20-181-4 Remove the wire harness (Item 1) [Figure 20-181-1] . 1 IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. 1 I-2003-0888 Figure 20-181-2 P-33390 Remove the 2 bolts (Item 1) [Figure 20-181-4] and nuts. 1 Remove the valve. 2 P-33388 Remove the hose (Item 1) [Figure 20-181-2] .
Remove the tubeline (Item 2) [Figure 20-181-2] . 442 Excavator 20-181-1 Service Manual