Bobcat Company 442 — Removal And Installation

HYDRAULIC PISTON PUMP DRIVE COUPLER (CONT’D) Figure 20-230-10 Removal And Installation (Cont’d) Figure 20-230-8 1 1 1 1 1 P-38133 Remove the eight bolts (Item 1) [Figure 20-230-10] . P-38132 Installation: Apply a medium strength thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 29-37 ft.-lb. (40-50 N•m) torque. Mark the flywheel cover to engine block (Item 1) [Figure 20-230-8] for ease of assembly. Figure 20-230-9 1 2 1 P-38130 Remove the 9 remaining bolts (Item 1) [Figure 20-230- 9] . Installation: Apply a medium strength thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 29-37 ft.-lb. (40-50 N•m) torque.

Remove the cover (Item 2) [Figure 20-230-9] . 442 Excavator 20-230-2 Service Manual