TRACKS (CONT’D) Figure 30-20-9 Track Adjustment Figure 30-20-7 1 1 2 P-32893 Install the track tensioning adapter (Item 1) [Figure 30- 20-9] on the end of a grease gun. P-32891 Loosen the top bolt (Item 1) [Figure 30-20-7] . Figure 30-20-10 Remove the bottom bolt and washer (Item 2) [Figure 30- 20-7] . Pivot the cover out of the way. Figure 30-20-8 1 P-32894 Install the adapter (Item 1) [Figure 30-20-10] on the track tensioner. 1 WARNING P-32892 Remove the grease fitting adapter (Item 1) [Figure 30- 20-8] from the end of a grease gun. Wear safety glasses to prevent eye injury when any of the following conditions exist: When fluids are under pressure.
Flying debris or loose material is present. Engine is running. Tools are being used. W-2019-1285 442 Excavator 30-20-4 Service Manual