Bobcat Company 442 — Disassembly And Assembly

TRACK FRAME Disassembly And Assembly WARNING Remove the track. (See Rubber Track Removal And Installation on Page 30-20-6.) Figure 30-30-1 1 P-62574 AVOID INJURY OR DEATH Spring loaded components under pressure can cause serious injury or death. Do not disassemble the coil spring assembly. W-2617-1004 Figure 30-30-3 P-40855 Slide the idler (Item 1) [Figure 30-30-1] towards the front of the track frame. 3 Figure 30-30-2 1 1 2 P-40857 Raise the hoist and remove the idler assembly (Item 1) [Figure 30-30-3] . Assembly: Install the idler assembly with the track tension guide (Item 2) [Figure 30-30-3] towards the outside of the track frame.

P-40856 Install a lifting chain (Item 1) [Figure 30-30-2] and hoist on the idler assembly. (See TRACK IDLER on Page 30-40-1.) DO NOT DISASSEMBLE OR REPAIR THE COIL SPRING ASSEMBLY (Item 3) [Figure 30-30-3] . 442 Excavator 30-30-1 Service Manual