TRACK IDLER (CONT’D) Figure 30-40-29 Assembly (Cont’d) Figure 30-40-27 1 1 2 P-40863 Install the plug (Item 1) [Figure 30-40-29] . P-40880 Figure 30-40-30 Press down on the mount (Item 1) and install the roll pin (Item 2) [Figure 30-40-27] . 1 2 3 Figure 30-40-28 P-40862 3 2 1 Install the track tension guide (Item 1) [Figure 30-40-30] on the bolt and washer. P-40881 Install the bolts and washers (Item 2) [Figure 30-40-30] through the recoil spring frame. Add 12 oz. (0.35 L) of 80 w/90 gear oil through the fill hole (Item 1) [Figure 30-40-28] . Install the spacer blocks (Item 3) [Figure 30-40-30] on the bolts. Apply thread adhesive (Loctite™ 242) to the threads of the plug.
Install the recoil spring assembly on the idler mounts. 442 Excavator 30-40-9 Service Manual