LOWER TRACK ROLLER (CONT’D) Figure 30-60-3 Disassembly Figure 30-60-1 1 P-40696 1 Remove the roll pin (Item 1) [Figure 30-60-3] from both sides of the roller. P-40695 Figure 30-60-2 Figure 30-60-4 2 1 1 P-40694 P-40697 Remove the mount (Item 1) [Figure 30-60-4] from both sides of the roller. The track frame is equipped with four external guide rollers (Item 1) [Figure 30-60-1] and two internal guide rollers (Item 1) [Figure 30-60-2] per side. The disassembly procedure is shown on the internal guide roller. The procedure is the same for both rollers. Apply moderate heat to the plug (Item 2) [Figure 30-60- 2] to melt the thread adhesive and remove the plug. Drain the oil from the roller.
442 Excavator 30-60-2 Service Manual