LOWER TRACK ROLLER (CONT’D) Figure 30-60-7 Disassembly (Cont’d) Figure 30-60-5 1 P-40705 1 Remove the O-ring (Item 1) [Figure 30-60-7] from all four seal assemblies. P-40706 Remove the seal/O-ring assembly (Item 1) [Figure 30- 60-5] from both mounts. Figure 30-60-8 Figure 30-60-6 1 1 P-40701 Remove the O-ring (Item 1) [Figure 30-60-8] from both ends of the shaft. P-40699 Remove the seal/O-ring assembly (Item 1) [Figure 30- 60-6] from both sides of the roller. NOTE: The steel seals are a matched set. Always install the outer seal so it will run against the original inner seal. If replacing seals, always install a matched set. 442 Excavator 30-60-3 Service Manual