Bobcat Company 442 — Assembly

LOWER TRACK ROLLER (CONT’D) Figure 30-60-20 Assembly (Cont’d) Figure 30-60-18 1 1 P-40757 The seal assembly (Item 1) [Figure 30-60-20] stand off height must be equal and the O-ring must not be twisted. P-40754 Place the seal assembly (Item 1) [Figure 30-60-18] in the installation tool. The O-ring and seal ring assembly has to be lubricated with alcohol, so the O-ring will slip past the housing retaining ring and seal uniformly in the housing radius. Dip the O-ring and seal ring assembly in a pan of alcohol. Figure 30-60-19 1 P-40756 Shake off the excess alcohol and install the seal assembly (Item 1) [Figure 30-60-19] in the roller.

Use firm even pressure on the installation tool to pop the O-ring into the motor housing. Remove the installation tool. 442 Excavator 30-60-7 Service Manual