LOWER TRACK ROLLER (CONT’D) Figure 30-60-23 Assembly (Cont’d) Figure 30-60-21 1 1 P-40763 Install the roller (Item 1) [Figure 30-60-23] over the shaft. P-40761 Figure 30-60-24 Figure 30-60-22 1 1 P-40754 P-40762 Place the seal assembly in the installation tool (Item 1) [Figure 30-60-24] . Apply a light film of oil to both metal seal rings (Item 1) [Figure 30-60-21] & [Figure 30-60-22] . The O-ring and seal ring assembly has to be lubricated with alcohol, so the O-ring will slip past the housing retaining ring and seal uniformly in the housing radius. NOTE: Do not get any oil on the rubber O-rings. Dip the O-ring and seal ring assembly in a pan of alcohol. 442 Excavator 30-60-8 Service Manual