Bobcat Company 442 — Assembly

LOWER TRACK ROLLER (CONT’D) Figure 30-60-27 Assembly (Cont’d) Figure 30-60-25 2 1 1 P-40766 Install the O-ring (Item 1) [Figure 30-60-27] on the shaft. P-40764 Apply a light film of oil to both metal seals (Item 2) [Figure 30-60-27] . Shake off the excess alcohol and install the seal assembly (Item 1) [Figure 30-60-25] in the idler. NOTE: Do not get any oil on the rubber O-rings. Use firm even pressure on the installation tool to pop the O-ring into the roller. Figure 30-60-28 Remove the installation tool. Figure 30-60-26 1 1 P-40767 Install the mount (Item 1) [Figure 30-60-28] on the shaft.

P-40765 The seal assembly stand off height must be equal and the O-ring (Item 1) [Figure 30-60-26] must not be twisted. 442 Excavator 30-60-9 Service Manual