Bobcat Company 442 — Lug Abrasion

TRACK DAMAGE IDENTIFICATION (CONT’D) Replacement: Lug Abrasion No replacement is required. Prevention: Causes Of The Damage: Figure 30-80-16 Lug abrasion is more or less inevitable. Even if lug abrasion is proceeding, the rubber track can be used. However, as the traction performance deteriorates accordingly, it is highly recommended to replace the abraded tracks with new ones when the lug height becomes less than 0.197 in (5 mm). Prevention: In order to prevent the rubber track from abnormal or premature abrasion, following operating conditions should be avoided:

Making quick and repeated turns on concrete and asphalt roads P-4381 Driving up and down hilly paths with slippage Figure 30-80-17 Making frequent turns on paths covered with rocks and wood As its service time proceeds, the lug side inevitably undergoes abrasion [Figure 30-80-16] & [Figure 30-80- 17] . 442 Excavator 30-80-7 Service Manual Lug Abrasion PI-13049