TRACK DAMAGE IDENTIFICATION (CONT’D) Cuts On The Edges Of Track Roller Side (Cont’d) In case of damage by interference with the machine frame: Figure 30-80-25 Cut Tear PI-13057 If a machine continues operating with rubber tracks being detracted, the rubber tracks may get caught up in the machine frame or undercarriage parts resulting in damage. Furthermore, when a machine travels along side slopes, the rubber tracks are deformed so much that they come into contact with the machine frame and undercarriage parts, which causes cutting, gouging and rubbing of rubber tracks in the end [Figure 30-80-25] . Prevention:
When traveling, a machine operator should be careful not to drive over any projections on the ground. He should also prevent rubber tracks from coming into contact with concrete walls, ditches and ridges. If rubber tracks are detracked, the machine should be stopped immediately for retracking. 442 Excavator 30-80-11 Service Manual