Bobcat Company 442 — Cuts On The Edges Of Track Roller Side

TRACK DAMAGE IDENTIFICATION (CONT’D) Causes Of The Damage: Cuts On The Edges Of Track Roller Side This damage is caused by objects on the field or by interference with the machine frame. Damage: In case of damage by objects on the operating ground: Figure 30-80-22 Figure 30-80-24 P-4384 Figure 30-80-23 PI-13056 The edges of rubber track are often deformed largely due to a bumpy ground surface, stones and other objects, which cause extensive stress on the edges resulting in the damage. Especially, when a machine drives over concrete ridges, this type of damage easily occurs [Figure 30-80-24] . Edge Edge PI-13055 Both edges of a rubber track have no special reinforcements.

It sometimes occurs during operation that they are cut or torn off [Figure 30-80-22] & [Figure 30-80-23] . Replacement: In such case, the rubber track does not have to be replaced. 442 Excavator 30-80-10 Service Manual