CAB (CONT’D) Top Window Removal And Installation Figure 40-20-74 1 P-40954 Remove the urethane adhesive (Item 1) [Figure 40-20- 74] around the outside diameter of the window. Remove the window. Installation: Clean and dry the surface around the window opening. Apply urethane adhesive (P/N 6808882). NOTE: The urethane adhesive has a four hour initial cure time and will achieve full strength after twenty four hours at 72 F (22 C) and fifty percent humidity. The cure time will be longer with lower temperatures and/or lower humidity. 442 Excavator 40-20-24 Service Manual