Bobcat Company 442 — Removal And Installation

BOOM (CONT’D) Figure 40-120-23 Removal And Installation (Cont’d) 1 Figure 40-120-21 3 1 3 2 4 2 P-38263 1 Mark the hoses for correct length and orientation. Remove the bolt (Item 1) [Figure 40-120-23] and clamp. P-38261 Mark the hoses (Item 1) [Figure 40-120-21] for correct length and orientation. Remove the bolt (Item 2) washer and hose clamp (Item 3) [Figure 40-120-23] . Remove the bolts (Item 2) and hose clamps (Item 3) [Figure 40-120-21] from both sides of the boom. Remove the return to tank hose (Item 4) [Figure 40-120- 23] . Figure 40-120-24 Figure 40-120-22 1 1 1 2 P-38262 P-38264 Mark the hoses and remove the two bolts (Item 1) washers and hose guide (Item 2) [Figure 40-120-22] .

Remove the hoses (Item 1) [Figure 40-120-24] from the boom. Remove the chain hoist from the boom. 442 Excavator 40-120-6 Service Manual