ARM (CONT’D) Figure 40-170-13 Removal And Installation (Cont’d) Figure 40-170-11 1 1 P-38271 Remove the bushing (Item 1) [Figure 40-170-13] from both sides of the arm. P-38244 Remove the pivot pin (Item 1) [Figure 40-170-11] . Installation: Install the bushing until it is flush with the outside of the arm. Figure 40-170-12 1 P-38245 Move the arm away from the boom. Remove the shims (Item 1) [Figure 40-170-12] from both sides of the arm. Bushing Removal And Installation 442 Excavator 40-130-4 Service Manual