STARTER (CONT’D) Figure 50-40-46 Inspection And Repair (All Models) (Cont’d) Figure 50-40-44 1 P-63377 Install the bushing (Item 1) [Figure 50-40-46] . N-15059 Figure 50-40-47 Brush Holder Insulation Test: Use a circuit tester, touch one probe to the positive brush holder plate and the other probe to the holder plate [Figure 50-40-44] . There should be no continuity. If there is continuity, replace or repair. Assembly (All Models) Figure 50-40-45 1 P-63364 1 Install the bearing (Item 1) [Figure 50-40-47] . P-63332 Inspect the over running clutch (Item 1) [Figure 50-40- 45] , it must rotate freely in the direction of the starter rotation and locked in the opposite rotation.
442 Excavator 50-40-14 Service Manual