Bobcat Company 442 — Removal And Installation

MUFFLER (S/N 522311001 & ABOVE) (CONT’D) Figure 60-20-12 Removal And Installation (Cont’d) Figure 60-20-10 1 1 P-40467 1 Figure 60-20-13 P-40469 Remove the bolts (Item 1) [Figure 60-20-10] and nuts. Figure 60-20-11 2 1 1 3 P-40468 3 Remove the four bolts (Item 1) [Figure 60-20-12] & [Figure 60-20-13] and washers. Remove the muffler from the mount. P-40470 Remove the bolt (Item 1), washer wire harness clamp and nut. Reposition the wire harness (Item 2) [Figure 60- 20-11] to prevent damage to the harness when removing the muffler. Remove the bolts (Item 3) [Figure 60-20-11] and washers. Installation: Apply medium strength thread adhesive (Loctite™ 242) to the bolt threads.

Tighten the bolts to 33 ft.-lb. (45 N•m) torque. Remove the muffler and mount assembly. 442 Excavator 60-20-3 Service Manual