MUFFLER (S/N 522311001 & ABOVE) (CONT’D) Figure 60-20-8 Removal And Installation (Cont’d) Installation: Tighten the bolts to 125-140 ft.-lb. (170-190 N•m) torque. Slide the pump away from the engine. 1 Figure 60-20-6 2 P-40472 Remove the clamp (Item 1) [Figure 60-20-8] . 1 Reposition the tubeline (Item 2) [Figure 60-20-8] for clearance when removing the muffler. Figure 60-20-9 P-40474 Remove the clamp (Item 1) [Figure 60-20-6] . Figure 60-20-7 1 P-40471 1 2 Remove the three nuts (Item 1) [Figure 60-20-9] . P-40473 Remove the bolt (Item 1) [Figure 60-20-7] , spacer and nut. Remove the bolt (Item 2) [Figure 60-20-7] and nut. 442 Excavator 60-20-2 Service Manual