MUFFLER (S/N 522311001 & ABOVE) Figure 60-20-3 Removal And Installation Drain the hydraulic reservoir. (See Replacing The Hydraulic Oil on Page 10-100-2.) 1 Remove the rear cover. (See REAR COVER on Page 40- 150-1.) Figure 60-20-1 1 P-35232 Remove the four bolts (Item 1) [Figure 60-20-3] . 1 Figure 60-20-4 P-35231 Remove the two bolts (Item 1) [Figure 60-20-1] and hose clamps. 1 Figure 60-20-2 P-38128 Figure 60-20-5 1 P-35231 Loosen the clamp (Item 1) [Figure 60-20-2] . Rotate the clamp to provide clearance to the suction fitting bolts. 1 P-38129 Remove the two pump mount bolts (Item 1) [Figure 60- 20-4] and [Figure 60-20-5] and washers. 442 Excavator 60-20-1 Service Manual