ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Figure 60-50-6 Engine Compression Checking (Cont’d) Figure 60-50-4 P-63091 Install the injector retainer and bolt [Figure 60-50-6] . P-61842 Figure 60-50-7 Remove the injector [Figure 60-50-4] . Installation: Tighten the injector to 12-15 ft.-lb. (16-21 N•m) torque. 1 Figure 60-50-5 P-63092 Connect the compression gauge (Item 1) [Figure 60-50- 7] to the adapter. Turn the engine with the starter at 200 to 300 RPM. Run the test for each cylinder two times at 5 to 10 seconds each time and take the average reading. P-63090 Install the compression adapter tool [Figure 60-50-5] .
The correct compression of the engine is 406-479 PSI (28-33 bar) with no more than 15% difference between the cylinders. 442 Excavator 60-50-2 Service Manual