Bobcat Company 442 — Fuel Injection Pump Timing

ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Figure 60-50-21 Fuel Injection Pump Timing Figure 60-50-19 P-61922 Turn the locking tool. Move the control rod to the stop position by pressing in on the setscrew [Figure 60-50- 21] . P-61920 Figure 60-50-22 Install the control rod locking tool (MEL-XXX) [Figure 60- 50-19] . Figure 60-50-20 P-61923 Install the graduated disc MEL XXX on the flywheel flange [Figure 60-50-22] . P-61921 Measure and record the distance from the locking tool to the stop position of the control rod [Figure 60-50-20] . Measure and record the distance from the locking tool to the start position of the control rod.

The difference in the distance between the start and stop position is the control rod travel. The allowable range for control rod travel is 0.669-0.689 in. (17-17,5 mm) 442 Excavator 60-50-9 Service Manual