Bobcat Company 442 — Fuel Injection Pump Timing

ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Figure 60-50-25 Fuel Injection Pump Timing (Cont’d) Figure 60-50-23 P-61926 Set the graduated disc to zero before TDC. [Figure 60- 50-25] . P-61924 Turn the crankshaft in the direction of engine rotation approximately 90°. Install the pointer MEL XXX [Figure 60-50-23] . Install the TDC measuring bar MEL XXX and washers MEL XXX. Figure 60-50-26 Install a dial indicator on the measuring bar. Turn the crankshaft in the direction of engine rotation until the dial indicator reaches it’s reversal point. Figure 60-50-24 P-61927 Turn the crankshaft against direction of engine rotation to 0.315 (8 mm) before TDC.

The dial indicator reads zero [Figure 60-50-26] . P-61925 Set the dial indicator to zero [Figure 60-50-24] . Turn the crankshaft in the direction of engine rotation approximately 90°. Turn the crankshaft against the direction of engine rotation to 0.315 in. (8 mm) before TDC. The dial indicator reads zero. 442 Excavator 60-50-10 Service Manual