ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-23 Fuel Injection Pump Removal (Cont’d) Figure 60-51-21 1 2 P-56990 Install the tappet into its respective bore [Figure 60-51- 23] . P5283 Remove the fuel injection pump (Item 1) [Figure 60-51- 21] . Remove the shim (Item 2) [Figure 60-51-21] . NOTE: The shim(s) are used to time the injection pump, keep the same thickness for each injection pump. Figure 60-51-22 P5279 Use a magnet to remove the injection pump tappet [Figure 60-51-22] . Inspect the tappet for wear or damage, replace as needed. 442 Excavator 60-51-8 Service Manual