Bobcat Company 442 — Fuel Injection Pump Timing

ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Measured Depth 2.29 inch. (58.16 mm) Difference0.070 inch. (1,78 mm) Fuel Injection Pump Timing Determine the number of shim(s) needed to get the correct installation height. The fuel injection pump does not need to be timed if the tappet, shim(s) and the camshaft are not changed. Figure 60-51-26 Figure 60-51-24 1 P-56994 P-56991 Install the appropriate number of shims on the engine block surface. [Figure 60-51-26] . Install a depth micrometer (Item 1) [Figure 60-51-24] and record the measurement.

Figure 60-51-25 Tappet a MC-2175 Measure the distance between the engine block surface (without shim) and surface of the tappet [Figure 60-51- 25] . Installation dimension of the injection pump is 2.36 inch (60 mm). EXAMPLE: Specifications: Installation Depth2.36 inch. (60 mm) 442 Excavator 60-51-9 Service Manual