ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-50 Fuel Injector Assembly Figure 60-51-48 CD-15338 Install the thrust pin with the centering collar facing toward the compression spring [Figure 60-51-50] . CD-15336 Figure 60-51-51 Install the shim(s) [Figure 60-51-48] . The injector opening pressure is adjusted by selecting the correct amount of shim(s). A thicker shim will increase the opening pressure at the injector nozzle. Figure 60-51-49 CD-15339 Install the adapter with the centering pins toward the thrust pin [Figure 60-51-51] . CD-15337 Install the compression spring [Figure 60-51-49] . 442 Excavator 60-51-17 Service Manual