ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-54 Fuel Injector Assembly (Cont'd) Figure 60-51-52 CD-15342 Tighten the cap nut to 29-37 ft.-lb. (40-50 N•m) torque [Figure 60-51-54] . CD-15340 Check the injector nozzle on the nozzle tester before installation. (See Fuel Injector, Checking on Page 60-51- 14.) Install the injector nozzle, make sure the center bore fits over the centering pins of the adapter [Figure 60-51-52] . NOTE: Be careful that the nozzle needle does not fall out of the nozzle body. Figure 60-51-53 CD-15341 Install the nozzle cap nut [Figure 60-51-53] . 442 Excavator 60-51-18 Service Manual