ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-73 1 Timing Belt Installation (Cont'd) Figure 60-51-71 2 N-18866 1 With a torque degree wheel (Item 1) [Figure 60-51-73] tighten the camshaft bolt an additional 210°. N-18863 Remove the camshaft and crankshaft locating pins. Install the belt tension tool MEL-1460 (Item 1) [Figure 60-51-71] . Figure 60-51-74 Turn the idler tensioner pulley in counterclockwise direction to obtain a scale reading of 3.0-3.5. Tighten the idler tensioner pulley nut (Item 2) [Figure 60-51-71] to 14-17 ft.-lb. (19-23 N•m) torque. 1 Remove the belt tension tool.
Figure 60-51-72 N-18864 Mark the crankshaft pulley (Item 1) [Figure 60-51-74] . Make four complete crankshaft revolutions in a clockwise direction of engine rotation. Bring the mark on the crankshaft pulley back to the same position. N-18867 Initially tighten camshaft bolt to 22 ft.-lb. (30 N•m) [Figure 60-51-72] . 442 Excavator 60-51-24 Service Manual