ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-89 Valve Timing, Checking Figure 60-51-87 P-56710 1 At the crankshaft pulley bolt, install a torque wrench and turn the engine in the direction of rotation to 30 ft.-lb. (40 N•m) torque [Figure 60-51-89] . P-58319 Remove the torque wrench, DO NOT change the crankshaft position. Remove the camshaft access plug (Item 1) [Figure 60- 51-87] . Figure 60-51-90 Rotate the crankshaft/camshaft until the notch in the camshaft can be seen through the plug hole. Figure 60-51-88 1 1 P-58320 Remove the crankshaft access plug (Item 1) [Figure 60- 51-90] .
P-58443 Install the timing tool (Item 1) [Figure 60-51-88] . NOTE: The access plug is located on the front of the crankcase, below the turbocharger and just above the right side front engine mount. 442 Excavator 60-51-29 Service Manual