Bobcat Company 442 — Removal And Installation

ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-60-11 Removal And Installation (Cont’d) Installation: Tighten the bolts to 125-140 ft.-lb. (170-190 N•m) torque. Slide the pump away from the engine. 1 Figure 60-60-9 2 P-38134 1 Remove the radiator overflow hose (Item 1) [Figure 60- 60-11] . 2 Remove the top oil cover hose (Item 2) [Figure 60-60- 11] . P-38138 IMPORTANT Remove the test fitting (Item 1) and hose (Item 2) [Figure 60-60-9] from the gear pump. When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.

Figure 60-60-10 1 I-2003-0888 Figure 60-60-12 2 1 2 P-38139 Remove the top bolt (Item 1) and two bottom bolts (Item 2) [Figure 60-60-10] . Installation: Tighten the bolts to 22-26 ft.-lb. (30-35 N•m) torque. P-36924 Slide the pump away from the engine. Remove the bolt (Item 1) [Figure 60-60-12] . Reposition the hose (Item 2) [Figure 60-60-12] towards the bottom of the engine. 442 Excavator 60-60-3 Service Manual