ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-60-6 Removal And Installation (Cont’d) Figure 60-60-4 1 1 1 P-35232 Remove the four bolts (Item 1) [Figure 60-60-6] . P-36936 Figure 60-60-7 Remove the two top condenser mount bolts (Item 1) [Figure 60-60-4] and washers. Remove the mount. NOTE: The receiver/dryer will be removed with the mount. Figure 60-60-5 1 P-38128 1 Figure 60-60-8 P-35231 Loosen the clamp (Item 1) [Figure 60-60-5] . Rotate the clamp to provide clearance to the suction fitting bolts. 1 P-38129 Remove the two pump mount bolts (Item 1) [Figure 60- 60-7] and [Figure 60-60-8] and washers. 442 Excavator 60-60-2 Service Manual