Bobcat Company 442 — Removal And Installation

ENGINE (S/N 522311001 & ABOVE) Figure 60-60-2 Removal And Installation 2 Drain the hydraulic reservoir. (See Replacing The Hydraulic Oil on Page 10-100-2.) Disconnect the battery. (See BATTERY on Page 50-20- 1.) Remove the right side cover. (See RIGHT SIDE COVER on Page 40-160-1.) Remove the muffler. (See MUFFLER (S/N 522311001 & ABOVE) on Page 60-20-1.) 1 P-36935 Discharge the air conditioning system. (See SYSTEM CHARGING AND RECLAMATION on Page 70-130-1.) Remove the hose (Item 1) and wire harness (Item 2) [Figure 60-60-2] from the receiver/dryer. Remove the air conditioning condenser.

(See CONDENSER (S/N 522311001 & ABOVE) on Page 70- 150-1 or See CONDENSOR (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) on Page 70-151-1.) Figure 60-60-3 Figure 60-60-1 1 1 2 1 1 1 1 P-36937 P-38639 Remove the two bottom condenser mount bolts (Item 1) [Figure 60-60-3] and washers. Remove the eleven bolts (Item 1) and bottom panel (Item 2) [Figure 60-60-1] . 442 Excavator 60-60-1 Service Manual