RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-57 Assembly (Cont'd) Figure 60-80-55 P-61898 Install the idler gear [Figure 60-80-57] . P-61896 NOTE: The bores must align. Figure 60-80-58 Install the thrust washer [Figure 60-80-55] . NOTE: Align the thrust washer with the axis of the shaft. Figure 60-80-56 P-61899 Install the bearing journal [Figure 60-80-58] . P-61897 Tighten the bolt to 21ft.-lb. (29 N•m) torque [Figure 60- 80-56] . 442 Excavator 60-80-16 Service Manual