Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-53 Assembly (Cont'd) Figure 60-80-51 P-61894 Install the second balancing shaft [Figure 60-80-53] . P-61892 NOTE: Install the weights toward the oil pan sealing surface. Install the bearing journal [Figure 60-80-51] . Figure 60-80-54 NOTE: Turn the crankshaft in both directions to align the bearing journal in the bore. Figure 60-80-52 P-61895 Turn the adjusting pin in as far as possible [Figure 60- 80-54] . P-61893 NOTE: Align the balancing shaft with the crankcase bore. Install and tighten the bolt to 21 ft.-lb. (29 N•m) torque [Figure 60-80-52] . 442 Excavator 60-80-15 Service Manual