RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-49 Assembly (Cont'd) Figure 60-80-47 P-61890 Turn the crankshaft clockwise until the crankshaft and idler gears have moved three teeth [Figure 60-80-49] . P-61888 Figure 60-80-50 Install the idler gear [Figure 60-80-47] . NOTE: The teeth on the idler gear must mesh with the teeth on the crankshaft gear. Figure 60-80-48 P-61891 Turn the crankshaft until the bores are in line [Figure 60- 80-50] . P-61889 Mark the teeth on the idler gear and crankshaft gear [Figure 60-80-48] . 442 Excavator 60-80-14 Service Manual