Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-65 Assembly (Cont'd) Figure 60-80-63 P-61906 Apply thread lock adhesive to the bolt. Install and tighten the bolt to 7-9 ft.-lb. (10-12 N•m) torque [Figure 60-80- 65] . P-61904 Figure 60-80-66 Install and tighten the bolt to 15 ft.-lb. (21 N•m) torque [Figure 60-80-63] . Figure 60-80-64 P-61907 Put high temperature silicone sealing compound on the rear cover [Figure 60-80-66] . P-61905 Install the control rod and guide sleeve [Figure 60-80- 64] . 442 Excavator 60-80-18 Service Manual