RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-69 Assembly (Cont'd) Figure 60-80-67 P-61910 Lightly oil the rotors on the front cover [Figure 60-80-69] . P-61909 Figure 60-80-70 Figure 60-80-68 P-61911 P-61908 Use the grease to install the gasket on the front cover [Figure 60-80-70] . Install the rear cover complete with a new rear seal [Figure 60-80-67] and [Figure 60-80-68] . NOTE: Make sure the rear cover oil pan surface aligns with the engine block surface [Figure 60-80-68]. Install and tighten the bolts to 14-17 ft.-lb. (21-23 N•m) torque. 442 Excavator 60-80-19 Service Manual