RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-87 Assembly (Cont'd) Figure 60-80-85 P-61945 Install the pushrods [Figure 60-80-87] . P-61943 Figure 60-80-88 Install the cylinder head gasket over the dowel pins [Figure 60-80-85] . The sealing surfaces of the cylinder head gasket must be free of oil. Install the cylinder head. Put a light coat of oil on the short cylinder head bolts. Figure 60-80-86 P-61946 Install the rocker arm bracket [Figure 60-80-88] . NOTE: Align the rocker arm bracket with the pushrods and valves. P-61944 Install the short cylinder head bolts [Figure 60-80-86] . NOTE: Do not tighten the cylinder head bolts at this time.
442 Excavator 60-80-24 Service Manual