Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-91 Assembly (Cont'd) Put a light coat of oil on the long head bolts. Figure 60-80-89 P-61949 Figure 60-80-92 P-61947 Install the long head bolts [Figure 60-80-89] . Figure 60-80-90 Tighten the cylinder head bolts in the correct sequence [Figure 60-80-91] and [Figure 60-80-92] . 1st Stage Torque . . . . . . . . . . . . . . . . . 22 ft.lbs. (30 N•m) 2nd Stage Torque . . . . . . . . . . . . . . . . 59 ft.lbs. (80 N•m) 3rd Stage Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90° P-61948 Adjust the valve clearance. (See Valve Clearance Adjustment on Page 60-50-23.) Tighten the bolt to 15 ft.-lb.

(21 N•m) torque [Figure 60- 80-90] . 442 Excavator 60-80-25 Service Manual MS2062 MS2062